Resumen:
In this paper, a contactless RFID system formed by chipless tags based on the magneto-inductive wave (MIW) delay lines is proposed. In order to carry out the reading process, two reader probes have been designed, manufactured, and measured: the first one based on an axial to planar MIW transition and the second one based on a printed monopole. Moreover, a study is presented to verify the probe with better performance in terms of delay and losses when a tag is interrogated. By using the probe based on an axial to planar MIW transition, it is possible to transmit a pulse with a distance between tag and probe higher than 1 cm. Finally, two chipless tags are designed and manufactured to verify the performance of the proposed system. All the designed and manufactured elements are printed on a low-cost substrate (FR4). The manufactured 2 bit tags codify the 01 and 10 patterns. A good decodification of the time-domain response associated with the tags is achieved when using the proposed whole system.
Palabras Clave: Chipless, Contactless, Magneto-Inductive Wave (MIW), Radio Frequency Identification (RFID), Square SplitRing Resonator (SSRR).
Índice de impacto JCR y cuartil WoS: 4,435 - Q1 (2018); 4,600 - Q1 (2023)
Referencia DOI:
https://doi.org/10.1109/TAP.2018.2858144
Publicado en papel: Octubre 2018.
Publicado on-line: Julio 2018.
Cita:
J.J. Martínez-Martínez, F.J. Herraiz-Martínez, G. Galindo-Romera, A contactless RFID system based on chipless MIW tags. IEEE Transactions on Antennas and Propagation. Vol. 66, nº. 10, pp. 5064 - 5071, Octubre 2018. [Online: Julio 2018]
